• RBF600 Factory Line
  • RBF600 Factory Line

    Motul
    Part Number: RBF600
    Brand: Motul
    MSRP: $21.60
    Our Price: $17.95
    Share :


Extended Description

  • 100% Synthetic Fluid – DOT 4 For hydraulic actuated brake and clutch systems
  • Very high boiling point : 312°C / 594°F

TYPEOFUSE

All types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems.

Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40°C (-40°F).

PERFORMANCE

STANDARDS : FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925

Extreme thermal resistance and stability : The very high boiling point (312°C / 594°F), superior to conventional DOT 5.1 non silicone base / DOT 5 silicone base fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) enables an effective brake even under extreme conditions.

Efficient when rainy :

The very high wet boiling point (205°C / 401°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get to “vapor lock” phenomena.

The wet boiling point is measured by humidifying the product with about 3.5 % of water.

RECOMMENDATIONS

  • Avoid mixing with polyglycols based brake fluid with lower performances.
  • Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
  • Store brake fluid in its original container, tightly closed to prevent absorption of moisture.
  • Aggressive chemical product if contact with hands, paint or varnish.
  • If skin contact, rinse thoroughly with water.

PROPERTIES

  • 100% synthetic fluid, polyglycol bases.
  • Color Amber
  • Dry boiling point 312 °C / 594 °F
  • Wet boiling point 205 °C / 401 °F
  • Viscosity at -40°C (-40°F) 1750 mm²/s
  • Viscosity at 100°C (212°F) 2.5 mm²/s

Notes

Specification limits

Test

Unit

DOT 3

DOT 4

DOT 5.1

RBF600

Dry boiling point

°C

>205

>230

>260

312 (594°F)

Wet boiling point

°C

>140

>155

>180

205 (401°F)

Viscosity at -40°C (-40°F)

mm²/s

<1500

<1800

<900

1750

Viscosity at 100°C (212 °F) pH

mm²/s

7-11.5

>1.5

7.4

2.5

 

Effect on rubber SBR (Styrene -butadiene)

Volume change at 70°C (70 hours)

mm

0.15-1.4

0.76

Softening (IRHD)

 

10 max

4.0

Disintegration

 

no

no

Volume change at 120°C (70 hours)

mm

0.15-1.4

1.05

Softening (IRHD)

 

15 max

7

Disintegration

 

no

no

 

Evaporation

Loss at 100°C                                         

weight %                   

80% max                        

50

 

Fluidity and appearance at low temperature

Appearance at -40°C                                                                    

 

Clear

OK

Flow time

s

10 max

OK

Appearance at -50°C

 

clear

OK

Flow time

s

35 max

OK

 

Water tolerance

Appearance at -40°C

 

clear

OK

Flow time

Seconds

10 max

OK

Appearance at +60°C

 

clear

OK

Sedimentation

%

0.15 max

OK

 

Anti-corrosion properties : Weight variation

Tinned iron

mg/cm2

0.2 max

0.01

Steel

mg/cm2

0.2 max

0.02

Aluminium

mg/cm2

0.1 max

0.03

Cast

mg/cm2

0.2 max

0.05

Tin

mg/cm2

0.4 max

0.09

Copper

mg/cm2

0.4 max

0.04

Part # Description Price
RBF600 RBF600 Factory Line $17.95 BUY
Footer